Heating, Ventilating and Air Conditioning: Analysis Design – McQuiston, Parker, Spitler – 6th Edition


Based on the most recent standards from ASHRAE, the sixth edition provides complete and up-to-date coverage of all aspects of heating, ventilation, and air conditioning. You’ll find the latest load procedures, indoor air procedures, and issues related to ozone depletion. Also integrated throughout the text are numerous worked examples that clearly show you how to apply the concepts in realistic scenarios.

The revision of this text continues to offer comprehensive treatment of heating, ventilation, and air conditioning concepts:
All material is based on the updated ASHRAE and product criteria and uses both SI and English units.

Practical, realistic are presented and the latest procedures and issues are covered.
Suitable for advanced study in HVAC , architectural engineering, and mechanical engineering departments.

Table of Contents

About the Authors.
1. Introduction.
1-1 Historical Notes.
1-2 Common HVAC Units and Dimensions.
1-3 Fundamental Physical Concepts.
1-4 Additional Comments.
2. Air-Conditioning Systems.
2-1 The Complete System.
2-2 System Selection and Arrangement.
2-3 HVAC Components and Distribution Systems.
2-4 Types of All-Air Systems.
2-5 Air-and-Water Systems.
2-6 All-Water Systems.
2-7 Decentralized Cooling and Heating.
2-8 Heat Pump Systems.
2-9 Heat Recovery Systems.
2-10 Thermal Energy Storage.
3. Moist Air Properties and Conditioning Processes.
3-1 Moist Air and the Standard Atmosphere.
3-2 Fundamental Parameters.
3-3 Adiabatic Saturation.
3-4 Wet Bulb Temperature and the Psychrometric Chart.
3-5 Classic Moist Air Processes.
3-6 Space Air Conditioning—Design Conditions.
3-7 Space Air Conditioning—Off-Design Conditions.
4. Comfort and Health—Indoor Environmental Quality.
4-1 Comfort—Physiological Considerations.
4-2 Environmental Comfort Indices.
4-3 Comfort Conditions.
4-4 The Basic Concerns of IAQ.
4-5 Common Contaminants.
4-6 Methods to Control Humidity.
4-7 Methods to Control Contaminants.
5. Heat Transmission in Building Structures.
5-1 Basic Heat-Transfer Modes.
5-2 Tabulated Overall Heat-Transfer Coefficients.
5-3 Moisture Transmission.
6. Space Heating Load.
6-1 Outdoor Design Conditions.
6-2 Indoor Design Conditions.
6-3 Transmission Heat Losses.
6-4 Infiltration.
6-5 Heat Losses from Air Ducts.
6-6 Auxiliary Heat Sources.
6-7 Intermittently Heated Structures.
6-8 Supply Air For Space Heating.
6-9 Source Media for Space Heating.
6-10 Computer Calculation of Heating Loads.
7. Solar Radiation.
7-1 Thermal Radiation.
7-2 The Earth’s Motion About the Sun.
7-3 Time.
7-4 Solar Angles.
7-5 Solar Irradiation.
7-6 Heat Gain Through Fenestrations.
7-7 Energy Calculations.
8. The Cooling Load.
8-1 Heat Gain, Cooling Load, and Heat Extraction Rate.
8-2 Application of Cooling Load Calculation Procedures.
8-3 Design Conditions.
8-4 Internal Heat Gains.
8-5 Overview of the Heat Balance Method.
8-6 Transient Conduction Heat Transfer.
8-7 Outside Surface Heat Balance—Opaque Surfaces.
8-8 Fenestration—Transmitted Solar Radiation.
8-9 Interior Surface Heat Balance—Opaque Surfaces.
8-10 Surface Heat Balance—Transparent Surfaces.
8-11 Zone Air Heat Balance.
8-12 Implementation of the Heat Balance Method.
8-13 Radiant Time Series Method.
8-14 Implementation of the Radiant Time Series Method.
8-15 Supply Air Quantities.
9. Energy Calculations and Building Simulation.
9-1 Degree-Day Procedure.
9-2 Bin Method.
9-3 Comprehensive Simulation Methods.
9-4 Energy Calculation Tools.
9-5 Other Aspects of Building Simulation.
10. Flow, Pumps, and Piping Design.
10-1 Fluid Flow Basics.
10-2 Centrifugal Pumps.
10-3 Combined System and Pump Characteristics.
10-4 Piping System Fundamentals.
10-5 System Design.
10-6 Steam Heating Systems.
11. Space Air Diffusion.
11-1 Behavior of Jets.
11-2 Air-Distribution System Design.
12. Fans and Building Air Distribution.
12-1 Fans.
12-2 Fan Relations.
12-3 Fan Performance and Selection.
12-4 Fan Installation.
12-5 Field Performance Testing.
12-6 Fans and Variable-Air-Volume Systems.
12-7 Air Flow in Ducts.
12-8 Air Flow in Fittings.
12-9 Accessories.
12-10 Duct Design—General.
12-11 Duct Design—Sizing.
13. Direct Contact Heat and Mass Transfer.
13-1 Combined Heat and Mass Transfer.
13-2 Spray Chambers.
13-3 Cooling Towers.
14. Extended Surface Heat Exchangers.
14-1 The Log Mean Temperature Deficiency (LMTD) Method.
14-2 The Number of Transfer Units (NTU) Method.
14-3 Heat Transfer–Single-Component Fluids.
14-4 Transport Coefficients Inside Tubes.
14-5 Transport Coefficients Outside Tubes and Compact Surfaces.
14-6 Design Procedures for Sensible Heat Transfer.
14-7 Combined Heat and Mass Transfer.
15. Refrigeration.
15-1 The Performance of Refrigeration Systems.
15-2 The Theoretical Single-Stage Compression Cycle.
15-3 Refrigerants.
15-4 Refrigeration Equipment Components.
15-5 The Real Single-Stage Cycle.
15-6 Absorption Refrigeration.
15-7 The Theoretical Absorption Refrigeration System.
15-8 The Aqua–Ammonia Absorption System.
15-9 The Lithium Bromide–Water System.
Appendix A. Thermophysical Properties.
Table A-1a. Properties of Refrigerant 718 (Water–Steam)— English Units.
Table A-1b. Properties of Refrigerant 718 (Water–Steam)—SI Units.
Table A-2a. Properties of Refrigerant 134a (1,1,1,2-Tetrafluoroethane)—English Units.
Table A-2b. Properties of Refrigerant 134a (1,1,1,2-Tetrafluoroethane)—SI Units.
Table A-3a. Properties of Refrigerant 22 (Chlorodifluoromethane)— English Units.
Table A-3b. Properties of Refrigerant 22 (Chlorodifluoromethane)— SI Units.
Table A-4a. Air—English Units.
Table A-4b. Air—SI Units.
Appendix B. Weather Data.
Table B-1a. Heating and Cooling Design Conditions—United States, Canada, and the World—English Units.
Table B-1b. Heating and Cooling Design Conditions—United States, Canada, and the World—SI Units.
Table B-2. Annual BinWeather Data for Oklahoma City,OK.
Table B-3. Annual Bin Weather Data for Chicago, IL.
Table B-4. Annual Bin Weather Data for Denver, CO.
Table B-5. Annual Bin Weather Data for Washington, DC.
Appendix C. Pipe and Tube Data.
Table C-1. Steel Pipe Dimensions—English and SI Units.
Table C-2. Type L Copper Tube Dimensions—English and SI Units.
Appendix D. Useful Data.
Table D-1. Conversion Factors.
Appendix E: Charts.
Chart 1a. ASHRAE Psychrometric Chart No. 1 (IP) (Reprinted by permission of ASHRAE.).
Chart 1b. ASHRAE Psychrometric Chart No. 1 (SI) (Reprinted by permission of ASHRAE.).
Chart 1Ha. ASHRAE Psychrometric Chart No. 4 (IP) (Reprinted by permission of ASHRAE.).
Chart 1Hb. ASHRAE Psychrometric Chart No. 6 (SI) (Reprinted by permission of ASHRAE.).
Chart 2. Enthalpy–concentration diagram for ammonia–water solutions (From Unit Operations by G.G. Brown, Copyright 1951 by John Wiley & Sons, Inc.).
Chart 3. Pressure–enthalpy diagram for refrigerant 134a (Reprinted by permission.).
Chart 4. Pressure–enthalpy diagram for refrigerant 22 (Reprinted by permission.).
Chart 5. Enthalpy-concentration diagram for Lithium Bromide–water solutions (Courtesy of Institute of Gas Technology, Chicago IL.).
Inline Feedbacks
View all comments
Would love your thoughts, please comment.x